STORE POLICY          TERMS & CONDITIONS          PRIVACY POLICY          DISCLAIMER                    © 2018 LAKE FORK GUIDE LANES          

Before using any Lake Fork Guide Lanes data or devices, please read our disclaimer.

If you purchased the downloadable version, you will also need a 2, 4 or 8 GB SD card to transfer the data to. Once the data is on the SD card, you can upload it to your graph. Please note, the capacity of the SD card is important and must not exceed 8 GB.

 

Digital download to SD card:

 

1.  After your purchase has completed, click the download button. An e-mail with the same download link will be sent after purchase.

2.  Once the "Lake Fork Guide Lanes Humminbird.ZIP" has downloaded, find the file in your download folder.

 

3.  Next, unzip the folder by right-clicking the file "Lake Fork Guide Lanes Humminbird.ZIP" and left-click Unzip or Extract Files. A folder named "Lake Fork Guide Lanes Humminbird" will be created.

4.  Double click the new folder. Then, cut or copy the folder named "MATRIX" onto an empty SD card. Any size SD card should work for most Humminbird Units.

5.  Remove/eject SD card from computer.

Uploading LFGL Waypoints to your Humminbird graph:

1.  Insert SD Card into one of the device slots.

2.  Wait for the screen to ask if you would like to upload the Nav Data.

3.  Press the cursor right to reply yes.

 

4.  Wait, (10-45 Seconds) for the 1,081 waypoints to load.

5. To ensure that the waypoints loaded onto the correct GPS locations, after loading go to the coordinates N 32degree49.201' W 95degree33.560'.  If these GPS coordinates are a waypoint labeled as a 'SRA' then the LFGL Waypoints most likely loaded correctly.

6. To also ensure all of the waypoints loaded check the total number, which should equal 1,081.

Troubleshooting:

Make sure your graph is running the most up-to-date software version.

 

If your graph isn't reading the card, eject and re-insert.

Most marine navigation units allow a maximum amount of waypoints so before loading Lake Fork Guide Lanes waypoints, make sure that your existing waypoints combined will not exceed the unit's maximum capacity.  If the number of waypoints will exceed the maximum, then put a blank SD card into your graph, find the (Navigation) Tab in Menu, click on (Waypoints, Routes, and Trails), click (Select All And Export to SD Card), click (Yes).  To delete your waypoints after saving them to an SD Card find (Navigation) Tab in Menu, click on (Waypoints, Routes, and Trails), then click (Select All and Delete), click (Yes) to confirm.

 

If some waypoints are small and others are large find the Tools Tab in the Menu then change User Mode from Basic to Advanced User Mode then under the Navigation Tab in the Menu, turn Waypoint Decluttering to "OFF". 

Having a specific issue that isn't listed here? Contact us for assistance.

Before using any Lake Fork Guide Lanes data or devices, please read our disclaimer.

If you purchased the downloadable version, you will also need a 2, 4 or 8 GB SD card to transfer the data to. Once the data is on the SD card, you can upload it to your graph. Please note, the capacity of the SD card is important and must not exceed 8 GB.

 

Digital download to SD Card:

 

1.  After your purchase has completed, click the download button. An e-mail with the same download link will be sent after purchase.

2.  Once the "Lake Fork Guide Lanes Lowrance.ZIP" has downloaded, find the file in your download folder.

 

3.  Next, unzip the folder by right-clicking the file "Lake Fork Guide Lanes Lowrance.ZIP" and left-click Unzip or Extract Files.  A folder named "Lake Fork Guide Lanes Lowrance" will be created.

4.  Double click the new folder.  Then, cut or copy the file named "LFGL LOWRANCE.gpx" onto an empty microSD card. Any size microSD card should work for most Lowrance Units.

5.  Remove/eject microSD card from computer.

Uploading LFGL Waypoints to your Lowrance graph:

1. Insert SD Card Adapter / microSD Card into one of the device slots.

2. Press (HOME) button on the Lowrance unit.

3. On the screen, select the icon (Files).

4. Select Memory Card R or L, depending on slot used.

5. Select the file 'LFGL LOWRANCE.gpx'. Press IMPORT.

6. Are you sure? Press YES to complete import.

7. To ensure that the waypoints loaded onto the correct GPS locations, after loading go to the coordinates N 32degree49.201' W 95degree33.560'.  If these GPS coordinates are a waypoint labeled as a 'SRA' then the LFGL Waypoints most likely loaded correctly.

8. To also ensure all of the waypoints loaded check the total number, which should equal 1,081.

Troubleshooting:

Make sure your graph is running the most up-to-date software version.

 

If your graph isn't reading the card, eject and re-insert.

Most marine navigation units allow a maximum amount of waypoints so before loading Lake Fork Guide Lanes waypoints, make sure that your existing waypoints combined will not exceed the unit's maximum capacity.  If the number of waypoints will exceed the maximum, then put a blank SD card into your graph, find the (Navigation) Tab in Menu, click on (Waypoints, Routes, and Trails), click (Select All And Export to SD Card), click (Yes).  To delete your waypoints after saving them to an SD Card find (Navigation) Tab in Menu, click on (Waypoints, Routes, and Trails), then click (Select All and Delete), click (Yes) to confirm.

Having a specific issue that isn't listed here? Contact us for assistance.